ASTM D1264 - Water Washout Characteristics of Lubricating Greases
Signiﬁcance and Use
4.1 This test method estimates the resistance of greases to water washout from ball bearings under conditions of the test. No correlation with ﬁeld service has been established.
1.1 This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C and 79 °C (100 °F and 175 °F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. Precision and bias was determined using grease ranging from NLGI 3 to 0 grades in the research report (see Section 10).
1.2 This test method may not be suitable for some greases containing highly volatile components. This test method does not attempt to account for sample evaporation. It is the user’s responsibility to determine if evaporation of the sample is a signiﬁcant contributor to mass loss at the required drying temperature.
Extracted, with permission, from ASTM D1264-18e1 - Water Washout Characteristics of Lubricating Greases, copyright ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428. A copy of the complete standard may be purchased from ASTM International, astm.org