Pages
- Wear, Performance, and Simulation Testing
- Viscosity Testing & Shear Stability Testing
- Turnaround Times & Payment Terms
- Testing Highlights
- Wear Preventive Characteristics
- Viscosity Loss – It’s Only Temporary
- Understanding Hydraulic Fluids
- Thermo-oxidation Engine Oil Simulation Overview
- Testing Critical Properties of Brake Fluids
- Shear Stability and Viscosity Loss
- Scanning Brookfield/Gelation Index – Low Temperature, Low Shear
- NLGI’s New HPM Grease Specification
- NLGI HPM Grease and GC-LB Specifications
- Karl Fischer Water Testing – ASTM D6304, Procedure A, B and C
- Industrial Lubricant/Gear Oil Testing
- Grease Oxidation Measurement by an Advanced Technique
- Going Green – Wind Turbines & Lubricant Testing
- Fuel Dilution — The Cause, Effect, and Detection
- Foam Challenges in Lubricating Oils
- Engine Oil Volatility and ASTM D5800 – The Past, Present and Future
- Electric Vehicle Lubricant and Fluid Testing
- Electric Driveline Fluid Testing Update
- Elastomer Compatibility Testing
- Drivers of Custom Testing for Electric Vehicle Drivetrain Fluids
- Critical Properties of Electric Vehicle Drivetrain Fluids
- CEC L-105 and L-109 Oxidation Testing
- ASTM D8447 – Turbo Charger Deposits by Thermo-Oxidation Engine Oil Simulation Test – The Evolution
- Air Separation – The Key Performance Indicator
- Advanced SRV Wear Testing
- Addressing the Need for Electric Driveline Fluid Testing – CEC L-48 Oxidation DELETE 2 OF 2??
- Addressing Need for EV Driveline Fluid Testing – CEC L-48 Oxidation
- Testimonials
- Specifications
- Sitemap
- Services
- Sample Submission
- Quote Request
- Quality Assurance
- Physical Properties Testing
- Oxidation & Corrosion Testing
- Our Team
- News & Events
- Molecular Characterization Testing
- Lubricant Oil and Fluid Testing
- Lubricant and Industry Associations
- Home
- History, Mission & Values
- Frequently Asked Questions
- Fluid Blending
- Engine Oil Testing
- Elementor #12
- Elastomer Compatibility Testing
- Custom Projects
- Contact Us
- Careers
- astm methods
- ASTM E3070 – Standard Test Method for Shear Thinning Index of Non-Newtonian Liquids Using a Rotational Viscometer
- ASTM E2550 – Standard Test Method for Thermal Stability by Thermogravimetry
- ASTM E2412 – Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM E1858 – Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
- ASTM D976 – Standard Test Method for Calculated Cetane Index of Distillate Fuels
- ASTM D974 – Standard Test Method for Acid and Base Number by Color-Indicator Titration
- ASTM D972 – Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
- ASTM D97 – Standard Test Method for Pour Point of Petroleum Products
- ASTM D95 – Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
- ASTM D943 – Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
- ASTM D942 – Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
- ASTM D94 – Standard Test Methods for Saponification Number of Petroleum Products
- ASTM D93 – Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93 – Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D924 – Standard Test Method of Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D92 – Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
- ASTM D893 – Standard Test Method for Insolubles in Used Lubricating Oils
- ASTM D892 – Standard Test Method for Foaming Characteristics of Lubricating Oils
- ASTM D890 – Standard Test Method for Water in Liquid Pine Chemicals
- ASTM D877/D877M-19 – Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
- ASTM D874 – Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
- ASTM D86 – Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
- ASTM D8544 – Standard Test Method for Determination of Conductive Deposits of Electrical and Mechanical Components from Fluids in Liquid and Vapor States within an Electrically Charged System
- ASTM D8022 – Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
- ASTM D7844 – Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM D7624 – Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM D7619 – Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM D7594 – Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D7563 – Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
- ASTM D7462 – Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method) (Withdrawn 2016)
- ASTM D7421 – Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D7420 – Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D7415 – Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM D7414 – Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM D7412 – Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM D7371 – Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
- ASTM D7321 – Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
- ASTM D7317 – Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
- ASTM D7217 – Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D7216 – Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
- ASTM D7214 – Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7213 – Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM D7109 – Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
- ASTM D7098 – Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM D7097 – Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
- ASTM D6922 – Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
- ASTM D6795 – Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
- ASTM D6794 – Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM D6793 – Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus (Withdrawn 2021)
- ASTM D6709 – Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
- ASTM D665 – Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
- ASTM D664 – Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6616 – Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
- ASTM D6594 – Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C
- ASTM D6560 – Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
- ASTM D6557 – Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6443 – Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
- ASTM D6425 – Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D6417 – Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
- ASTM D6375 – Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
- ASTM D6371 – Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
- ASTM D6335 – Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
- ASTM D6304 – Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- ASTM D6278 – Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
- ASTM D6217 – Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
- ASTM D6200 – Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
- ASTM D6186 – Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
- ASTM D6185 – Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
- ASTM D6184 – Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
- ASTM D6138 – Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
- ASTM D6130 – Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
- ASTM D613 – Standard Test Method for Cetane Number of Diesel Fuel Oil
- ASTM D611 – Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
- ASTM D6082 – Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6022 – Standard Practice for Calculation of Permanent Shear Stability Index
- ASTM D5972 – Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
- ASTM D5969 – Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
- ASTM D5853 – Standard Test Method for Pour Point of Crude Oils
- ASTM D5827 – Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
- ASTM D5800 – Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
- ASTM D5769 – Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
- ASTM D5762 – Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
- ASTM D5707 – Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5706 – Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D566 – Standard Test Method for Dropping Point of Lubricating Grease (Withdrawn 2023)
- ASTM D5621 – Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
- ASTM D5620 – Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine (Withdrawn 2010)
- ASTM D5554 – Standard Test Method for Determination of the Iodine Value of Fats and Oils
- ASTM D5483 – Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
- ASTM D5453 – Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
- ASTM D5293 – Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator
- ASTM D5291 – Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D525 – Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
- ASTM D524 – Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
- ASTM D5186 – Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
- ASTM D5185 – Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM D5183 – Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- ASTM D5182 – Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
- ASTM D5175 – Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
- ASTM D5133 – Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D4951 – Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM D4927 – Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
- ASTM D482 – Standard Test Method for Ash from Petroleum Products
- ASTM D4742 – Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
- ASTM D4739 – Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
- ASTM D4737 – Standard Test Method for Calculated Cetane Index by Four Variable Equation
- ASTM D4737 – Standard Test Method for Calculated Cetane Index by Four Variable Equation
- ASTM D4693 – Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D4684 – Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4683 – Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
- ASTM D4629 -Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
- ASTM D4530 – Standard Test Method for Determination of Carbon Residue (Micro Method)
- ASTM D445 – Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- ASTM D4310 – Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D4294 – Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
- ASTM D4291 – Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
- ASTM D4290 – Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
- ASTM D4289 – Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
- ASTM D4287 – Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
- ASTM D4172 – Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
- ASTM D4170 – Standard Test Method for Fretting Wear Protection by Lubricating Greases
- ASTM D4052 – Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- ASTM D4049 – Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
- ASTM D4048 – Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D3829 – Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
- ASTM D381 – Standard Test Method for Gum Content in Fuels by Jet Evaporation
- ASTM D3704 – Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
- ASTM D3703 – Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
- ASTM D3527 – Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
- ASTM D3525 – Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography
- ASTM D3524 – Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
- ASTM D3427 – Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
- ASTM D3336 – Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
- ASTM D3238 – Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
- ASTM D3233 – Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
- ASTM D323 – Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
- ASTM D2983 – Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
- ASTM D2982 – Standard Test for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
- ASTM D2896 – Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
- ASTM D2893 – Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
- ASTM D2887 – Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
- ASTM D2879 – Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
- ASTM D287 – Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
- ASTM D2783 – Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- ASTM D2782 – Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
- ASTM D2717 – Standard Test Method for Thermal Conductivity of Liquids (Withdrawn 2018)
- ASTM D2714 – Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D2711 – Standard Test Method for Demulsibility Characteristics of Lubricating Oils
- ASTM D2709 – Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
- ASTM D2700 – Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
- ASTM D2699 – Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
- ASTM D2670 – Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
- ASTM D2624 – Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
- ASTM D2622 – Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM D2619 – Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
- ASTM D2603 – Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils
- ASTM D2596 – Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
- ASTM D2595 – Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
- ASTM D2532 – Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
- ASTM D2509 – Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
- ASTM D2500 – Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- ASTM D2422 – Standard Classification of Industrial Fluid Lubricants by Viscosity System
- ASTM D240 – Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D2369 – Standard Test Method for Volatile Content of Coatings
- ASTM D2274 – Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
- ASTM D2273 – Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023)
- ASTM D2272 – Standard Test Method for Oxidation of Steam Turbine Oils by Rotating Pressure Vessel
- ASTM D2270 – Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
- ASTM D2266 – Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
- ASTM D2265 – Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
- ASTM D217 – Standard Test Methods for Cone Penetration of Lubricating Grease
- ASTM D2155 – Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
- ASTM D2112 – Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
- ASTM D2070 – Standard Test Method for Thermal Stability of Hydraulic Oils
- ASTM D2008 – Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2007 – Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
- ASTM D1957 – Standard Test Method for Hydroxyl Value of Fatty Oils and Acids (Withdrawn 2007)
- ASTM D1903 – Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
- ASTM D189 – Standard Test Method for Conradson Carbon Residue of Petroleum Products
- ASTM D1831 – Standard Test Method for Roll Stability of Lubricating Grease
- ASTM D1768 – Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM D1748 – Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
- ASTM D1743 – Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D1742 – Standard Test Method for Oil Separation from Lubricating Grease During Storage
- ASTM D1662 – Standard Test Method for Active Sulfur in Cutting Oils
- ASTM D156 – Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
- ASTM D1544 – Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
- ASTM D1533 – Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
- ASTM D1500 – Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
- ASTM D1478 – Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D1404 – Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
- ASTM D1403 – Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
- ASTM D1401 – Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
- ASTM D1331 – Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
- ASTM D1319 – Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
- ASTM D130 – Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D1298 – Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- ASTM D1269 – Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM D1264 – Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
- ASTM D1218 – Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
- ASTM D1177 – Standard Test Method for Freezing Point of Aqueous Engine Coolants
- ASTM D1169 – Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D1120 – Standard Test Method for Boiling Point of Engine Coolants
- ASTM D1092 – Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
- ASTM D1084 – Standard Test Methods for Viscosity of Adhesives
- Applications
- Wind Turbine Lubricant Testing
- Turbine Lubricant Testing
- Marine Lubricant Testing
- Marine Fuel Testing
- Hydraulic Fluid Testing
- High-Performance Multiuse (HPM) Grease Specification
- Grease Quality Testing
- Gear Lubricant Testing
- Fuel Testing
- EV Lubricant and Fluid Testing
- Engine Oil Testing
- Electrical Insulating Fluid Testing
- Condition Monitoring Analysis
- Automatic Transmission Fluid (ATF) Testing
- About