High-Performance Multiuse (HPM) Grease Specification
High-Performance Multiuse (HPM) Grease Specification
The National Lubricating Grease Institute’s (NLGI) New High-Performance Multiuse (HPM) Grease Specification provides unified industry guidance on the performance of grease and is “chemistry neutral.” The specification is designed with tests and limits for enhanced performance in the areas of water resistance, high load-carrying capacity, saltwater corrosion resistance, and low-temperature performance. The performance-based specification ensures the grease can support these areas and can extend or maintain the operation of equipment. The specification’s limits are “challenging yet achievable” in order to set a new performance standard that grease users and specifiers can utilize for selecting greases to use in their applications.
NLGI HPM+CR – Corrosion-resistant greases create a chemical bond with surfaces or exclude moisture, to prevent corrosion and rust in marine coastal or industrial environments.
NLGI HPM+HL – High-load greases provide resistance to very strong pressures, impacts, and limiting conditions for lubrication.
NLGI HPM+LT – Low-temperature greases are designed for use in extreme cold, such as winter weather, polar or cryogenic conditions.
NLGI HPM+WR – Water-resistant greases stay in place in the presence of water while providing rust and corrosion protection.
Savant Labs is positioned to address your grease quality testing needs.
| ISO 17025 Accredited | Method Number | Test Description | Specification | View Method Summary |
|---|---|---|---|---|
| ASTM D86 Modified | Distillation by Gas Chromatograph | VIEW | ||
| ASTM D86 Modified | Distillation by Gas Chromatograph | VIEW | ||
| ✓ | ASTM D92 | Fire Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point and Fire Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point, Grease | VIEW | |
| ✓ | ASTM D92 | Flash Point and Fire Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point and Fire Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point and Fire Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point and Fire Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point, Grease | VIEW | |
| ✓ | ASTM D92 | Flash Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D92 | Flash Point and Fire Point, Cleveland Open Cup | VIEW | |
| ✓ | ASTM D93 | Flash Point, Pensky-Martins Closed Cup | VIEW | |
| ✓ | ASTM D93 | Flash Point, Pensky-Martins Closed Cup | VIEW | |
| ✓ | ASTM D93 | Flash Point, Pensky-Martins Closed Cup | VIEW | |
| ASTM D94 | Saponification Number | VIEW | ||
| ASTM D94 | Saponification Number | VIEW | ||
| ASTM D94 | Saponification Number | VIEW | ||
| ASTM D95 | Water by Distillation | VIEW | ||
| ASTM D95 | Water by Distillation | VIEW | ||
| ASTM D95 | Water by Distillation | VIEW | ||
| ASTM D95 | Water by Distillation | VIEW | ||
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | VIEW | |
| ✓ | ASTM D97 | Pour Point | GM dexos® | VIEW |
| ✓ | ASTM D130 | Copper Strip Corrosion | VIEW | |
| ✓ | ASTM D130 | Copper Strip Corrosion | VIEW | |
| ✓ | ASTM D130 | Copper Strip Corrosion | VIEW | |
| ✓ | ASTM D130 | Copper Strip Corrosion | VIEW | |
| ✓ | ASTM D130 | Copper Strip Corrosion | VIEW | |
| ✓ | ASTM D130 | Copper Strip Corrosion | VIEW | |
| ✓ | ASTM D130 | Copper Strip Corrosion | VIEW | |
| ASTM D156 | Color (Saybolt Chromometer Method) | VIEW | ||
| ASTM D156 | Color (Saybolt Chromometer Method) | VIEW | ||
| ASTM D156 | Color (Saybolt Chromometer Method) | VIEW | ||
| ASTM D156 | Color (Saybolt Chromometer Method) | VIEW | ||
| ASTM D156 | Color (Saybolt Chromometer Method) | VIEW | ||
| ASTM D189 | Carbon Residue, Conradson | VIEW | ||
| ASTM D189 | Carbon Residue, Conradson | VIEW | ||
| ASTM D217 | Cone Penetration, Grease, Unworked & Worked, Multiple Strokes | VIEW | ||
| ASTM D217 | Cone Penetration, Grease, Unworked & Worked, Multiple Strokes | VIEW | ||
| ASTM D217 | Cone Penetration, Grease, Unworked & Worked, Multiple Strokes | VIEW | ||
| ASTM D217 | Cone Penetration, Extended Worked (100,000 Strokes) | NLGI – HPM Core | VIEW | |
| ASTM D217 | Cone Penetration, Extended Worked (100,000 Strokes) | NLGI – HPM+CR | VIEW | |
| ASTM D217 | Cone Penetration, Extended Worked (100,000 Strokes) | NLGI – HPM+HL | VIEW | |
| ASTM D217 | Cone Penetration, Extended Worked (100,000 Strokes) | NLGI – HPM+LT | VIEW | |
| ASTM D217 | Cone Penetration, Extended Worked (100,000 Strokes) | NLGI – HPM+WR | VIEW | |
| ASTM D217 | Cone Penetration, Worked & 60 Strokes (Grease) | NLGI – HPM+CR | VIEW | |
| ASTM D217 | Cone Penetration, Worked & 60 Strokes (Grease) | NLGI – HPM+HL | VIEW | |
| ASTM D217 | Cone Penetration, Worked & 60 Strokes (Grease) | NLGI – HPM+WR | VIEW | |
| ASTM D217 | Cone Penetration, Worked & 60 Strokes (Grease) | NLGI – HPM+LT | VIEW | |
| ASTM D217 | Cone Penetration, Worked & 60 Strokes (Grease) | NLGI – HPM Core | VIEW | |
| ASTM D240 | Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) | VIEW | ||
| ASTM D240 | Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) | VIEW | ||
| ASTM D287 | API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) | VIEW | ||
| ASTM D287 | API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) | VIEW | ||
| ASTM D287 | API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) | VIEW | ||
| ASTM D287 | API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) | VIEW | ||
| ASTM D287 | API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) | VIEW | ||
| ASTM D323 | Reid Vapor Pressure | VIEW | ||
| ASTM D323 | Reid Vapor Pressure | VIEW | ||
| ASTM D381 | Gum Content of Gasoline (Washed and Unwashed) | VIEW | ||
| ASTM D381 | Gum Content of Gasoline (Washed and Unwashed) | VIEW | ||
| ASTM D381 | Gum Content of Gasoline (Washed and Unwashed) | VIEW | ||
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity (and Calculation of Dynamic Viscosity) | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity (and Calculation of Dynamic Viscosity) | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | VIEW | |
| ✓ | ASTM D445 | Kinematic Viscosity | API SP | VIEW |
| ✓ | ASTM D445 | Kinematic Viscosity | SAE J300 | VIEW |
| ✓ | ASTM D445 | Kinematic Viscosity | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D445 | Kinematic Viscosity | SAE J183 | VIEW |
| ✓ | ASTM D445 | Kinematic Viscosity | GM dexos® | VIEW |
| ✓ | ASTM D445 | Kinematic Viscosity | ACEA | VIEW |
| ASTM D482 | Total Ash | VIEW | ||
| ASTM D482 | Total Ash | VIEW | ||
| ASTM D482 | Total Ash | VIEW | ||
| ASTM D482 | Total Ash | VIEW | ||
| ASTM D524 | Carbon Residue, Ramsbottom | VIEW | ||
| ASTM D524 | Carbon Residue, Ramsbottom | VIEW | ||
| ASTM D524 | Carbon Residue, Ramsbottom | VIEW | ||
| ASTM D525 | Oxidation Stability (Gasoline) | VIEW | ||
| ASTM D525 | Oxidation Stability (Gasoline) | VIEW | ||
| ASTM D525 | Oxidation Stability (Gasoline) | VIEW | ||
| ASTM D566 | Dropping Point Grease | VIEW | ||
| ASTM D566 | Dropping Point Grease | VIEW | ||
| ASTM D611 | Aniline Point | VIEW | ||
| ASTM D611 | Aniline Point | VIEW | ||
| ASTM D613 | Cetane Number | VIEW | ||
| ASTM D613 | Cetane Number | VIEW | ||
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | VIEW | |
| ✓ | ASTM D664 | Acid Number | GM dexos® | VIEW |
| ASTM D665 | Rust Prevention 4 or 24 Hours (Method A or B) | VIEW | ||
| ASTM D665 | Rust Prevention 4 or 24 Hours (Method A or B) | VIEW | ||
| ASTM D665 | Rust Prevention 4 or 24 Hours (Method A or B) | VIEW | ||
| ASTM D665 | Rust Prevention 4 or 24 Hours (Method A or B) | VIEW | ||
| ASTM D665 | Rust Prevention 4 or 24 Hours (Method A or B) | VIEW | ||
| ASTM D665 | Rust Prevention 4 or 24 Hours (Method A or B) | VIEW | ||
| ✓ | ASTM D874 | Sulfated Ash | VIEW | |
| ✓ | ASTM D874 | Sulfated Ash | VIEW | |
| ✓ | ASTM D874 | Sulfated Ash | VIEW | |
| ✓ | ASTM D874 | Sulfated Ash | VIEW | |
| ✓ | ASTM D874 | Sulfated Ash | API CK / FA-4 | VIEW |
| ✓ | ASTM D874 | Sulfated Ash | GM dexos® | VIEW |
| ✓ | ASTM D874 | Sulfated Ash | ACEA | VIEW |
| ASTM D877 | Dielectric Breakdown Voltage | VIEW | ||
| ASTM D877 | Dielectric Breakdown Voltage | VIEW | ||
| ASTM D877 | Dielectric Breakdown Voltage | VIEW | ||
| ASTM D890 | Water in Liquid Pine Chemicals | VIEW | ||
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if Required) | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if Required) | VIEW | |
| ✓ | ASTM D892 | Foaming Characteristics of Lubricating Oils | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if Required) | VIEW | |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if Required) | API CK / FA-4 | VIEW |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if Required) | GM dexos® | VIEW |
| ✓ | ASTM D892 | Foaming, Sequence I – III (Specify Option A if Required) | API SP | VIEW |
| ✓ | ASTM D892 & D6082 | Foaming, Sequence I – IV (Specify Option A if Required) | VIEW | |
| ✓ | ASTM D892 & D6082 | Foaming, Sequence I – IV (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 & D6082 | Foaming, Sequence I – IV (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 & D6082 | Foaming, Sequence I – IV (Specify Option A if required) | VIEW | |
| ✓ | ASTM D892 & D6082 | Foaming, Sequence I – IV (Specify Option A if required) | API SP | VIEW |
| ✓ | ASTM D892 & D6082 | Foaming, Sequence I – IV (Specify Option A if required) | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D892 & D6082 | Foaming, Sequence I – IV (Specify Option A if required) | SAE J183 | VIEW |
| ASTM D893 | Insolubles, Pentane | VIEW | ||
| ASTM D893 | Insolubles, Pentane | VIEW | ||
| ASTM D893 | Insolubles, Pentane | VIEW | ||
| ASTM D893 | Insolubles, Pentane | VIEW | ||
| ASTM D893 | Insolubles, Pentane | VIEW | ||
| ASTM D924 | Dissipation/Power Factor | VIEW | ||
| ASTM D924 | Dissipation/Power Factor | VIEW | ||
| ASTM D924 | Dissipation/Power Factor | VIEW | ||
| ASTM D942 | Oxidation Stability (Grease) 100 Hours | VIEW | ||
| ASTM D942 | Oxidation Stability (Grease) 100 Hours | VIEW | ||
| ASTM D942 | Oxidation Stability (Grease) 100 Hours | NLGI – HPM Core | VIEW | |
| ASTM D942 | Oxidation Stability (Grease) 100 Hours | NLGI – HPM+WR | VIEW | |
| ASTM D942 | Oxidation Stability (Grease) 100 Hours | NLGI – HPM+CR | VIEW | |
| ASTM D942 | Oxidation Stability (Grease) 100 Hours | NLGI – HPM+HL | VIEW | |
| ASTM D942 | Oxidation Stability (Grease) 100 Hours | NLGI – HPM+LT | VIEW | |
| ASTM D943 | Oxidation Characteristics (2.0 TAN or 1000, 2000 or 3000 Hours) | VIEW | ||
| ASTM D943 | Oxidation Characteristics (2.0 TAN or 1000, 2000 or 3000 Hours) | VIEW | ||
| ASTM D943 | Oxidation Characteristics (2.0 TAN or 1000, 2000 or 3000 Hours) | VIEW | ||
| ASTM D943 | Oxidation Characteristics (2.0 TAN or 1000, 2000 or 3000 Hours) | VIEW | ||
| ASTM D972 | Evaporation Loss (Grease) – Specify Time and Temperature | VIEW | ||
| ASTM D972 | Evaporation Loss (Grease) – Specify Time and Temperature | VIEW | ||
| ASTM D974 | Acid Number | VIEW | ||
| ASTM D974 | Base Number | VIEW | ||
| ASTM D974 | Acid Number | VIEW | ||
| ASTM D974 | Acid and Base Number by Color-Indicator Titration | VIEW | ||
| ASTM D974 | Base Number | VIEW | ||
| ASTM D974 | Acid Number | VIEW | ||
| ASTM D974 | Acid Number | VIEW | ||
| ASTM D974 | Acid Number | VIEW | ||
| ASTM D974 | Acid Number | VIEW | ||
| ASTM D976 & D4737 | Cetane Index (Calculated from D1298 and D86) | VIEW | ||
| ASTM D976 & D4737 | Cetane Index (Calculated from D1298 and D86) | VIEW | ||
| ASTM E659 | Auto-Ignition Temperature, Liquid Chemicals | NA | ||
| ASTM E659 | Auto-Ignition Temperature, Liquid Chemicals | NA | ||
| ASTM G99 | Wear Testing with a Pin-on-Disk Apparatus | VIEW | ||
| ASTM G99 | Wear Testing with a Pin-on-Disk Apparatus | VIEW | ||
| ASTM D972 | Evaporation Loss (Grease) – Specify Time and Temperature | VIEW | ||
| ASTM D974 | Acid Number | VIEW | ||
| ASTM D974 | Base Number | VIEW | ||
| ASTM D1084B | T-Bar Viscosity | VIEW | ||
| ASTM D1084B | T-Bar Viscosity | VIEW | ||
| ASTM D1092 | Apparent Viscosity, Grease | VIEW | ||
| ASTM D1092 | Apparent Viscosity, Grease | VIEW | ||
| ASTM D1120 | Boiling Point of Coolants | VIEW | ||
| ASTM D1169 | Specific Resistance (Resistivity) | VIEW | ||
| ASTM D1169 | Specific Resistance (Resistivity) | VIEW | ||
| ASTM D1169 | Specific Resistance (Resistivity) | VIEW | ||
| ASTM D1177 | Freeze Point | VIEW | ||
| ASTM D1177 | Freeze Point | VIEW | ||
| ASTM D1177 | Freeze Point | VIEW | ||
| ASTM D1218 | Refractive Index | VIEW | ||
| ASTM D1264 | Water Washout (Single or Two Bearings/Single Temperature) | VIEW | ||
| ASTM D1264 | Water Washout (Single or Two Bearings/Single Temperature) | VIEW | ||
| ASTM D1264 | Water Washout (Single or Two Bearings/Single Temperature) | VIEW | ||
| ASTM D1264 | Water Washout Characteristics of Greases | NLGI – HPM Core | VIEW | |
| ASTM D1264 | Water Washout Characteristics of Greases | NLGI – HPM+CR | VIEW | |
| ASTM D1264 | Water Washout Characteristics of Greases | NLGI – HPM+HL | VIEW | |
| ASTM D1264 | Water Washout Characteristics of Greases | NLGI – HPM+LT | VIEW | |
| ASTM D1264 | Water Washout Characteristics of Greases | NLGI – HPM+WR | VIEW | |
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1298 | Density / API Gravity, Hydrometer | VIEW | ||
| ASTM D1319 | Hydrocarbon Type | VIEW | ||
| ASTM D1319 | Hydrocarbon Type | VIEW | ||
| ASTM D1331 | Surface Tension | VIEW | ||
| ASTM D1331 | Surface Tension | VIEW | ||
| ASTM D1401 | Emulsion Characteristics, Water Separability | VIEW | ||
| ASTM D1401 | Emulsion Characteristics, Water Separability | VIEW | ||
| ASTM D1401 | Emulsion Characteristics, Water Separability | VIEW | ||
| ASTM D1401 | Emulsion Characteristics, Water Separability | VIEW | ||
| ASTM D1401 | Emulsion Characteristics, Water Separability | VIEW | ||
| ASTM D1403 | Cone Penetration, 1/4 or 1/2 Scale | VIEW | ||
| ASTM D1403 | Cone Penetration, 1/4 or 1/2 Scale | VIEW | ||
| ASTM D1404 | Harmful Particles in Grease | VIEW | ||
| ASTM D1404 | Harmful Particles in Grease | VIEW | ||
| ASTM D1478 | Low Temperature Torque – Grease | VIEW | ||
| ASTM D1478 | Low-Temperature Torque – Grease | VIEW | ||
| ASTM D1478 | Low Temperature Torque – Grease | VIEW | ||
| ASTM D1478 | Low-Temperature Torque – Grease | NLGI – HPM Core | VIEW | |
| ASTM D1478 | Low-Temperature Torque – Grease | NLGI – HPM+CR | VIEW | |
| ASTM D1478 | Low-Temperature Torque – Grease | NLGI – HPM+HL | VIEW | |
| ASTM D1478 | Low-Temperature Torque – Grease | NLGI – HPM+LT | VIEW | |
| ASTM D1478 | Low-Temperature Torque – Grease | NLGI – HPM+WR | VIEW | |
| ASTM D1500 | Color | VIEW | ||
| ASTM D1500 | Color | VIEW | ||
| ASTM D1500 | Color | VIEW | ||
| ASTM D1500 | Color | VIEW | ||
| ASTM D1500 | Color | VIEW | ||
| ASTM D1500 | Color | VIEW | ||
| ASTM D1500 | Color | VIEW | ||
| ASTM D1533 | Water in Insulating Liquids by Coulometric Karl Fischer Titration | VIEW | ||
| ASTM D1533 | Water in Insulating Liquids by Coulometric Karl Fischer Titration | VIEW | ||
| ASTM D1544 | Color of Transparent Liquids – Gardner Scale | VIEW | ||
| ASTM D1544 | Color of Transparent Liquids – Gardner Scale | VIEW | ||
| ASTM D1544 | Color of Transparent Liquids – Gardner Scale | VIEW | ||
| ASTM D1544 | Color of Transparent Liquids – Gardner Scale | VIEW | ||
| ASTM D1544 | Color of Transparent Liquids – Gardner Scale | VIEW | ||
| ASTM D1662 | Sulfur, Active | VIEW | ||
| ASTM D1742 | Oil Separation, Storage of Greases | VIEW | ||
| ASTM D1742 | Oil Separation, Storage of Greases | VIEW | ||
| ASTM D1742 | Oil Separation, Storage of Greases | VIEW | ||
| ASTM D1742 | Oil Separation, Storage of Greases | NLGI – HPM Core | VIEW | |
| ASTM D1742 | Oil Separation, Storage of Greases | NLGI – HPM+CR | VIEW | |
| ASTM D1742 | Oil Separation, Storage of Greases | NLGI – HPM+HL | VIEW | |
| ASTM D1742 | Oil Separation, Storage of Greases | NLGI – HPM+LT | VIEW | |
| ASTM D1742 | Oil Separation, Storage of Greases | NLGI – HPM+WR | VIEW | |
| ASTM D1743 | Rust Prevention Properties of Grease | VIEW | ||
| ASTM D1743 | Rust Prevention Properties of Grease | VIEW | ||
| ASTM D1743 | Rust Prevention Properties of Grease | NLGI – HPM Core | VIEW | |
| ASTM D1743 | Rust Prevention Properties of Grease | NLGI – HPM+CR | VIEW | |
| ASTM D1743 | Rust Prevention Properties of Grease | NLGI – HPM+HL | VIEW | |
| ASTM D1743 | Rust Prevention Properties of Grease | NLGI – HPM+WR | VIEW | |
| ASTM D1743 | Rust Prevention Properties of Grease | NLGI – HPM+LT | VIEW | |
| ASTM D1748 | Rust Protection by Humidity Cabinet | VIEW | ||
| ASTM D1748 | Rust Protection by Humidity Cabinet | VIEW | ||
| ASTM D1768 | Water and Sediment for Opaque or In-Service Oils | VIEW | ||
| ASTM D1768 | Water and Sediment for Opaque or In-Service Oils | VIEW | ||
| ASTM D1831 | Roll Stability of Grease | VIEW | ||
| ASTM D1831 | Roll Stability of Grease | VIEW | ||
| ASTM D1831 | Roll Stability of Grease | VIEW | ||
| ASTM D1831 | Roll Stability of Grease | NLGI – HPM Core | VIEW | |
| ASTM D1831 | Roll Stability of Grease | NLGI – HPM+CR | VIEW | |
| ASTM D1831 | Roll Stability of Grease | NLGI – HPM+HL | VIEW | |
| ASTM D1831 | Roll Stability of Grease | NLGI – HPM+LT | VIEW | |
| ASTM D1831 | Roll Stability of Grease | NLGI – HPM+WR | VIEW | |
| ASTM D1903 | Calculating Coefficient of Thermal Expansion through Density | VIEW | ||
| ASTM D1903 | Calculating Coefficient of Thermal Expansion through Density | VIEW | ||
| ASTM D1957 | Hydroxyl Number | VIEW | ||
| ASTM D1957 | Hydroxyl Number | VIEW | ||
| ASTM D2007 | Clay Gel Analysis | VIEW | ||
| ASTM D2007 | Clay Gel Analysis | VIEW | ||
| ASTM D2008 | UV Absorbance to Absorptivity | VIEW | ||
| ASTM D2008 | UV Absorbance to Absorptivity | VIEW | ||
| ASTM D2070 | Thermal Stability (Hydraulic Fluids) | VIEW | ||
| ASTM D2070 | Thermal Stability (Hydraulic Fluids) | VIEW | ||
| ASTM D2070 | Thermal Stability (Hydraulic Fluids) | VIEW | ||
| ASTM D2112 | Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C | VIEW | ||
| ASTM D2112 | Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C | VIEW | ||
| ASTM D2112 | Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C | VIEW | ||
| ASTM D2155 | Auto-Ignition Temperature (Hydraulic Fluids) | VIEW | ||
| ASTM D2265 | Dropping Point | VIEW | ||
| ASTM D2265 | Dropping Point | VIEW | ||
| ASTM D2265 | Dropping Point | VIEW | ||
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | VIEW | |
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | VIEW | |
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | VIEW | |
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | NLGI – HPM Core | VIEW |
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | NLGI – HPM+CR | VIEW |
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | NLGI – HPM+HL | VIEW |
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | NLGI – HPM+LT | VIEW |
| ✓ | ASTM D2266 | Four Ball Wear (Grease) | NLGI – HPM+WR | VIEW |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | VIEW | |
| ✓ | ASTM D2270 | Viscosity Index (Includes D445 at 40°C and 100°C) | GM dexos® | VIEW |
| ✓ | ASTM D2272 | Rotating Bomb Oxidation Test (RBOT) Single Run | VIEW | |
| ✓ | ASTM D2272 | Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run | VIEW | |
| ✓ | ASTM D2272 | Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run | VIEW | |
| ✓ | ASTM D2272 | Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run | VIEW | |
| ✓ | ASTM D2272 | Rotating Pressure Vessel Oxidation Test (RPVOT) Run to Hard Break | VIEW | |
| ✓ | ASTM D2272 | Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run | VIEW | |
| ✓ | ASTM D2272 | Rotating Pressure Vessel Oxidation Test (RPVOT) Run to Hard Break | VIEW | |
| ASTM D2273 | Trace Sediment | VIEW | ||
| ASTM D2273 | Trace Sediment | VIEW | ||
| ASTM D2274 | Oxidation Stability (Petroleum Fuel Oil) | VIEW | ||
| ASTM D2274 | Oxidation Stability (Petroleum Fuel Oil) | VIEW | ||
| ASTM D2274 | Oxidation Stability (Petroleum Fuel Oil) | VIEW | ||
| ASTM D2369 | Volatile Organic Content (VOC) | VIEW | ||
| ASTM D2369 | Volatile Organic Content (VOC) | VIEW | ||
| ASTM D2369 | Volatile Organic Content (VOC) | VIEW | ||
| ASTM D2422 & D445 | Industrial Fluid Lubricants by Viscosity System | VIEW | ||
| ASTM D2422 & D445 | Industrial Fluid Lubricants by Viscosity System | VIEW | ||
| ASTM D2500 | Cloud Point | VIEW | ||
| ASTM D2500 | Cloud Point | VIEW | ||
| ASTM D2500 | Cloud Point | VIEW | ||
| ASTM D2500 | Cloud Point | VIEW | ||
| ASTM D2500 | Cloud Point | VIEW | ||
| ASTM D2509 | Timken OK Load for Grease (Specify Starting Load) | VIEW | ||
| ASTM D2509 | Timken OK Load for Grease (Specify Starting Load) | VIEW | ||
| ASTM D2532 | Viscosity Stability at Low Temperature | VIEW | ||
| ASTM D2532 | Viscosity Stability at Low Temperature | VIEW | ||
| ASTM D2595 | Evaporation Loss, Grease, Wide Temperature Range | VIEW | ||
| ASTM D2595 | Evaporation Loss, Grease, Wide Temperature Range | VIEW | ||
| ✓ | ASTM D2596 | Four Ball Extreme Pressure (Grease) Up to and Above 400 kg | VIEW | |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure Up to and Above 400 kg | VIEW | |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure Up to and Above 400 kg | VIEW | |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure (Grease) Up to and Above 400 kg | VIEW | |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure (Grease) Up to and Above 400 kg | NLGI – HPM+HL | VIEW |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure (Grease) Up to and Above 400 kg | NLGI – HPM Core | VIEW |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure (Grease) Up to and Above 400 kg | NLGI – HPM+CR | VIEW |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure (Grease) Up to and Above 400 kg | NLGI – HPM+LT | VIEW |
| ✓ | ASTM D2596 | Four Ball Extreme Pressure (Grease) Up to and Above 400 kg | NLGI – HPM+WR | VIEW |
| ASTM D2603 | Sonic Shear, Oils | VIEW | ||
| ASTM D2603 | Sonic Shear, Oils | VIEW | ||
| ASTM D2619 | Hydrolytic Stability | VIEW | ||
| ASTM D2619 | Hydrolytic Stability | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | VIEW | ||
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | API SP | VIEW | |
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | ILSAC GF-6A/GF-6B | VIEW | |
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | SAE J183 | VIEW | |
| ASTM D2622 | Sulfur by XRF – Wavelength Dispersive | GM dexos® | VIEW | |
| ASTM D2624 | Electrical Conductivity of Aviation and Distillate Fuels | VIEW | ||
| ASTM D2624 | Electrical Conductivity of Aviation and Distillate Fuels | VIEW | ||
| ASTM D2624 | Electrical Conductivity of Aviation and Distillate Fuels | VIEW | ||
| ASTM D2670 | Falex Pin & Vee Wear | VIEW | ||
| ASTM D2670 | Falex Pin & Vee Wear | VIEW | ||
| ASTM D2670 | Falex Pin & Vee Wear | VIEW | ||
| ASTM D2670 | Falex Pin & Vee Wear | VIEW | ||
| ASTM D2699 | Octane Number (Research Rating) | VIEW | ||
| ASTM D2699 | Octane Number (Research Rating) | VIEW | ||
| ASTM D2700 | Octane Number (Motor Rating) | VIEW | ||
| ASTM D2709 | Water and Sediment | VIEW | ||
| ASTM D2709 | Water and Sediment | VIEW | ||
| ASTM D2709 | Water and Sediment | VIEW | ||
| ASTM D2709 | Water and Sediment | VIEW | ||
| ASTM D2711 | Demulsibility – Procedure A (No EP Additives) | VIEW | ||
| ASTM D2711 | Demulsibility – Procedure B (Contains EP Additives) | VIEW | ||
| ASTM D2711 | Demulsibility – Procedure A (No EP Additives) | VIEW | ||
| ASTM D2711 | Demulsibility – Procedure B (Contains EP Additives) | VIEW | ||
| ASTM D2711 | Demulsibility | VIEW | ||
| ASTM D2714 | Block on Ring Friction and Wear | VIEW | ||
| ASTM D2714 | Block on Ring Friction and Wear | VIEW | ||
| ASTM D2717 | Thermal Conductivity (Single Temperature) | VIEW | ||
| ASTM D2717 | Thermal Conductivity (Single Temperature) | VIEW | ||
| ASTM D2782 | Timken Extreme Pressure (Specify Starting Load) | VIEW | ||
| ASTM D2782 | Timken Extreme Pressure (Specify Starting Load) | VIEW | ||
| ASTM D2782 | Timken Extreme Pressure (Specify Starting Load) | VIEW | ||
| ✓ | ASTM D2783 | Four Ball Extreme Pressure Up to and Above 400 kg | VIEW | |
| ✓ | ASTM D2783 | Four Ball Extreme Pressure Up to and Above 400 kg | VIEW | |
| ✓ | ASTM D2783 | Four Ball Extreme Pressure Up to and Above 400 kg | VIEW | |
| ✓ | ASTM D2783 | Four Ball Extreme Pressure Up to and Above 400 kg | VIEW | |
| ASTM D2879 | Vapor Pressure by Isoteniscope (Single & Multiple Temperatures) | VIEW | ||
| ASTM D2879 | Vapor Pressure by Isoteniscope (Single & Multiple Temperatures) | VIEW | ||
| ✓ | ASTM D2887 | Gas Chromatography – Carbon Distribution Extended | VIEW | |
| ✓ | ASTM D2887 | Gas Chromatography – Carbon Distribution Extended | VIEW | |
| ✓ | ASTM D2887 | Gas Chromatography – Carbon Distribution Extended | VIEW | |
| ✓ | ASTM D2887 | Gas Chromatography – Carbon Distribution | VIEW | |
| ASTM D2893 | Oxidation Characteristics Extreme Pressure | VIEW | ||
| ASTM D2893 | Oxidation Characteristics Extreme Pressure | VIEW | ||
| ASTM D2893 | Oxidation Characteristics Extreme Pressure | VIEW | ||
| ✓ | ASTM D2896 | Base Number | VIEW | |
| ✓ | ASTM D2896 | Base Number | VIEW | |
| ✓ | ASTM D2896 | Base Number | VIEW | |
| ✓ | ASTM D2896 | Base Number | VIEW | |
| ✓ | ASTM D2896 | Base Number | VIEW | |
| ✓ | ASTM D2896 | Base Number | VIEW | |
| ✓ | ASTM D2896 | Base Number | GM dexos® | VIEW |
| ✓ | ASTM D2896 | Base Number | ACEA | VIEW |
| ASTM D2982 | Glycol-Base Antifreeze in Used Oils | VIEW | ||
| ASTM D2982 | Glycol-Base Antifreeze in Used Oils | VIEW | ||
| ASTM D2982 | Glycol-Base Antifreeze in Used Oils | VIEW | ||
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ✓ | ASTM D2983 | Brookfield Viscosity, +20°C to -60°C (Per Temperature) | VIEW | |
| ASTM D3233 | Falex Extreme Pressure | VIEW | ||
| ASTM D3233 | Falex Extreme Pressure | VIEW | ||
| ASTM D3233 | Falex Extreme Pressure | VIEW | ||
| ASTM D3238 | Carbon Distribution Analysis | VIEW | ||
| ASTM D3238 | Carbon Distribution Analysis | VIEW | ||
| ASTM D3336 | High Temperature Bearing Performance Up to 600 Hours | VIEW | ||
| ASTM D3336 | High Temperature Bearing Performance Up to 600 Hours | VIEW | ||
| ASTM D3336 | High Temperature Bearing Performance Up to 600 Hours | VIEW | ||
| ASTM D3427 | Air Release, Gas Bubble Separation | VIEW | ||
| ASTM D3427 | Air Release, Gas Bubble Separation | VIEW | ||
| ASTM D3427 | Air Release, Gas Bubble Separation | VIEW | ||
| ASTM D3427 | Air Release, Gas Bubble Separation | VIEW | ||
| ASTM D3427 | Air Release, Gas Bubble Separation | VIEW | ||
| ✓ | ASTM D3524 | Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) | VIEW | |
| ✓ | ASTM D3524 | Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) | VIEW | |
| ✓ | ASTM D3524 | Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) | VIEW | |
| ✓ | ASTM D3525 | Fuel Dilution, Gasoline | VIEW | |
| ✓ | ASTM D3525 | Fuel Dilution, Gasoline | VIEW | |
| ✓ | ASTM D3525 | Fuel Dilution, Gasoline | VIEW | |
| ASTM D3527 | High Temperature Life, Wheel Bearing Grease | VIEW | ||
| ASTM D3527 | High Temperature Life, Wheel Bearing Grease | VIEW | ||
| ASTM D3703 | Peroxide Value | VIEW | ||
| ASTM D3703 | Peroxide Value | VIEW | ||
| ASTM D3704 | Oscillation Friction Wear, Grease | VIEW | ||
| ASTM D3704 | Oscillation Friction Wear, Grease | VIEW | ||
| ✓ | ASTM D3829 | Mini-Rotary Viscosity (MRV), Single Temperature | VIEW | |
| ✓ | ASTM D3829 | Mini-Rotary Viscosity (MRV), Single Temperature | VIEW | |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | VIEW | |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | VIEW | |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | VIEW | |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | NLGI – HPM Core | VIEW |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | NLGI – HPM+CR | VIEW |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | NLGI – HPM+HL | VIEW |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | NLGI – HPM+LT | VIEW |
| ✓ | ASTM D4048 | Copper Strip Corrosion, Grease | NLGI – HPM+WR | VIEW |
| ASTM D4049 | Resistance of Lubricating Grease to Water Spray | VIEW | ||
| ASTM D4049 | Resistance of Lubricating Grease to Water Spray | VIEW | ||
| ASTM D4049 | Resistance of Lubricating Grease to Water Spray | NLGI – HPM+WR | VIEW | |
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | VIEW | ||
| ASTM D4052 | Specific Gravity (Includes API Gravity) | GM dexos® | VIEW | |
| ASTM D4170 | Fretting Wear, Grease | VIEW | ||
| ASTM D4170 | Fretting Wear, Grease | VIEW | ||
| ASTM D4170 | Fretting Wear, Grease | VIEW | ||
| ASTM D4170 | Fretting Wear, Grease | NLGI – HPM+HL | VIEW | |
| ✓ | ASTM D4172 | Four Ball Wear | VIEW | |
| ✓ | ASTM D4172 | Four Ball Wear | VIEW | |
| ✓ | ASTM D4172 | Four Ball Wear | VIEW | |
| ✓ | ASTM D4172 | Four Ball Wear | VIEW | |
| ✓ | ASTM D4172 | Four Ball Wear | VIEW | |
| ASTM D4287 | High-Shear Viscosity Using a Cone/Plate Viscometer | VIEW | ||
| ASTM D4287 | High-Shear Viscosity Using a Cone/Plate Viscometer | VIEW | ||
| ASTM D4289 | Elastomer Compatibility HPM Elastomer | VIEW | ||
| ASTM D4289 | Elastomer Compatibility HPM Elastomer SRE-NBR 28/P or SRE-NBR 28/PX | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L and CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L or CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility HPM Elastomer | VIEW | ||
| ASTM D4289 | Elastomer Compatibility HPM Elastomer SRE-NBR 28/P or SRE-NBR 28/PX | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L and CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L or CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L and CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L or CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility HPM Elastomer | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L and CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L or CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L and CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L or CR Grease | VIEW | ||
| ASTM D4289 | Elastomer Compatibility NBR L | NLGI – HPM+WR | VIEW | |
| ASTM D4289 | Elastomer Compatibility NBR L | NLGI – HPM Core | VIEW | |
| ASTM D4289 | Elastomer Compatibility NBR L | NLGI – HPM+CR | VIEW | |
| ASTM D4289 | Elastomer Compatibility NBR L | NLGI – HPM+HL | VIEW | |
| ASTM D4289 | Elastomer Compatibility NBR L | NLGI – HPM+LT | VIEW | |
| ASTM D4290 | Leakage of Wheel Bearing Grease | VIEW | ||
| ASTM D4290 | Leakage of Wheel Bearing Grease | VIEW | ||
| ASTM D4291 | Glycol | VIEW | ||
| ASTM D4291 | Glycol | VIEW | ||
| ASTM D4291 | Glycol | VIEW | ||
| ASTM D4294 | Sulfur by XRF – Energy Dispersive | VIEW | ||
| ASTM D4294 | Sulfur by XRF – Energy Dispersive | VIEW | ||
| ASTM D4294 | Sulfur by XRF – Energy Dispersive | VIEW | ||
| ASTM D4310 | Sludging and Corrosion Tendency Up to 1000 Hours | VIEW | ||
| ASTM D4310 | Sludging and Corrosion Tendency Up to 1000 Hours | VIEW | ||
| ASTM D4310 | Sludging and Corrosion Tendency Up to 1000 Hours | VIEW | ||
| ASTM D4530 | Carbon Residue, Micro | VIEW | ||
| ASTM D4530 | Carbon Residue, Micro | VIEW | ||
| ✓ | ASTM D4629 | Nitrogen by Chemiluminescence | VIEW | |
| ✓ | ASTM D4629 | Nitrogen by Chemiluminescence | VIEW | |
| ✓ | ASTM D4629 | Nitrogen by Chemiluminescence | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, New & Used Oil | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, New & Used Oil | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, New & Used Oil | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, New & Used Oil | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, New & Used Oil | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, New & Used Oil | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, New & Used Oil | VIEW | |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, 150°C, New Oil | API CK / FA-4 | VIEW |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, 150°C, New Oil | API SP | VIEW |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, 150°C, New Oil | SAE J300 | VIEW |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, 150°C, New Oil | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, 150°C, New Oil | SAE J183 | VIEW |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, 150°C, New Oil | GM dexos® | VIEW |
| ✓ | ASTM D4683 | High Temperature High Shear / TBS Viscosity, 150°C, New Oil | ACEA | VIEW |
| ✓ | ASTM D4683 Mod. | High Temperature High Shear / TBS Viscosity, Below 50°C | VIEW | |
| ✓ | ASTM D4683 Mod. | High Temperature High Shear / TBS Viscosity, Multi-Temperature, Multi-Shear | VIEW | |
| ✓ | ASTM D4683 Mod. | High Temperature High Shear / TBS Viscosity, Below 50°C | VIEW | |
| ✓ | ASTM D4683 Mod. | High Temperature High Shear / TBS Viscosity, Multi-Temperature, Multi-Shear | VIEW | |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | VIEW | |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | VIEW | |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | VIEW | |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | VIEW | |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | API SP | VIEW |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | SAE J300 | VIEW |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | SAE J183 | VIEW |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | GM dexos® | VIEW |
| ✓ | ASTM D4684 | TP-1 MRV Viscosity (Single Temperature) | ACEA | VIEW |
| ASTM D4693 | Low Temperature Torque, Wheel Bearing Grease | VIEW | ||
| ASTM D4693 | Low Temperature Torque, Wheel Bearing Grease | VIEW | ||
| ASTM D4693 | Low Temperature Torque, Wheel Bearing Grease | VIEW | ||
| ASTM D4737 | Cetane Index (Calculated from D1298 and D86) | VIEW | ||
| ASTM D4737 | Cetane Index (Calculated from D1298 and D86) | VIEW | ||
| ✓ | ASTM D4739 | Base Number | VIEW | |
| ✓ | ASTM D4739 | Base Number | VIEW | |
| ✓ | ASTM D4739 | Base Number | VIEW | |
| ✓ | ASTM D4739 | Base Number | VIEW | |
| ✓ | ASTM D4739 | Base Number | VIEW | |
| ✓ | ASTM D4739 | Base Number | GM dexos® | VIEW |
| ✓ | ASTM D4739 | Base Number | ACEA | VIEW |
| ASTM D4742 | Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils | VIEW | ||
| ASTM D4742 | Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils | VIEW | ||
| ASTM D4927 | Sulfur Content for Automatic Transmission Fluid by XRF | VIEW | ||
| ASTM D4927 | Sulfur Content for Automatic Transmission Fluid by XRF | VIEW | ||
| ASTM D4927 | Sulfur Content for Automatic Transmission Fluid by XRF | VIEW | ||
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | VIEW | |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | VIEW | |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | VIEW | |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | VIEW | |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | VIEW | |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | VIEW | |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | API CK / FA-4 | VIEW |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | API SP | VIEW |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | SAE J183 | VIEW |
| ✓ | ASTM D4951 | Elemental Analysis by Inductively Coupled Plasma, Wear Metals | GM dexos® | VIEW |
| ✓ | ASTM D5133 | Gelation Index | VIEW | |
| ✓ | ASTM D5133 | Scanning Brookfield Viscosity (-5°C to -40°C) | VIEW | |
| ✓ | ASTM D5133 | Scanning Brookfield Viscosity, Extended Temperature Range | VIEW | |
| ✓ | ASTM D5133 | Gelation Index | VIEW | |
| ✓ | ASTM D5133 | Scanning Brookfield Viscosity (-5ºC to -40ºC) | VIEW | |
| ✓ | ASTM D5133 | Scanning Brookfield Viscosity, Extended Temperature Range | VIEW | |
| ✓ | ASTM D5133 | Scanning Brookfield Viscosity (-5ºC to -40ºC) | VIEW | |
| ✓ | ASTM D5133 | Scanning Brookfield Viscosity (-5°C to -40°C) | VIEW | |
| ✓ | ASTM D5133 | Gelation Index | API SP | VIEW |
| ✓ | ASTM D5133 | Gelation Index | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D5133 | Gelation Index | SAE J183 | VIEW |
| ✓ | ASTM D5133 | Gelation Index | GM dexos® | VIEW |
| ASTM D5182 | FZG Gear Test – Up to 12 & 14 Stages | VIEW | ||
| ASTM D5182 | FZG Gear Test – Up to 12 & 14 Stages | VIEW | ||
| ASTM D5182 | FZG Gear Test – Up to 12 & 14 Stages | VIEW | ||
| ASTM D5183 | Coefficient of Friction by Four Ball | VIEW | ||
| ASTM D5183 | Coefficient of Friction by Four Ball | VIEW | ||
| ASTM D5183 | Coefficient of Friction by Four Ball | VIEW | ||
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Sulfur by Elemental Analysis by Inductively Coupled Plasma | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Sulfur by Elemental Analysis by Inductively Coupled Plasma | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Sulfur by Elemental Analysis by Inductively Coupled Plasma | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Sulfur by Elemental Analysis by Inductively Coupled Plasma | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Elemental Analysis by Inductively Coupled Plasma (No S) | VIEW | |
| ✓ | ASTM D5185 | Sulfur by Elemental Analysis by Inductively Coupled Plasma | API SP | VIEW |
| ✓ | ASTM D5185 | Sulfur by Elemental Analysis by Inductively Coupled Plasma | ACEA | VIEW |
| ✓ | ASTM D5185 | Sulfur by Elemental Analysis by Inductively Coupled Plasma | ILSAC GF-6A/GF-6B | VIEW |
| ASTM D5186 | Aromatics in Diesel Fuel | VIEW | ||
| ASTM D5186 | Aromatics in Diesel Fuel | VIEW | ||
| ASTM D5275 | Fuel Injector Shear Stability (FISST), 20, 30, 40 & Other Passes | NA | ||
| ASTM D5275 | Fuel Injector Shear Stability (FISST), 20, 30, 40 & Other Passes | NA | ||
| ASTM D5291 | Carbon, Hydrogen and Nitrogen Content | VIEW | ||
| ASTM D5291 | Nitrogen – Carlo Erba | VIEW | ||
| ASTM D5291 | Nitrogen – Carlo Erba | VIEW | ||
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | VIEW | |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | VIEW | |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | VIEW | |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | VIEW | |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | VIEW | |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | API SP | VIEW |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | SAE J300 | VIEW |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | SAE J183 | VIEW |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | GM dexos® | VIEW |
| ✓ | ASTM D5293 | Cold Cranking Simulator (Single Temperature) | ACEA | VIEW |
| ✓ | ASTM D5293 Mod. | Cold Cranking Simulator (Temperature Scan) | VIEW | |
| ✓ | ASTM D5293 Mod. | Cold Cranking Simulator (Temperature Scan) | VIEW | |
| ✓ | ASTM D5453 | Sulfur | VIEW | |
| ✓ | ASTM D5453 | Sulfur | VIEW | |
| ✓ | ASTM D5453 | Sulfur | VIEW | |
| ✓ | ASTM D5453 | Sulfur | VIEW | |
| ✓ | ASTM D5453 & D5762 | Sulfur and Nitrogen Package | VIEW | |
| ✓ | ASTM D5453 & D5762 | Sulfur and Nitrogen Package | VIEW | |
| ✓ | ASTM D5453 & D5762 | Sulfur and Nitrogen Package | VIEW | |
| ✓ | ASTM D5453 & D5762 | Sulfur and Nitrogen Package | VIEW | |
| ASTM D5483 | Oxidation Stability of Greases by PDSC | VIEW | ||
| ASTM D5483 | Oxidation Stability of Greases by PDSC | VIEW | ||
| ASTM D5554 | Iodine Value | VIEW | ||
| ASTM D5554 | Iodine Value | VIEW | ||
| ASTM D5620 | Drain and Dry Mode Using Falex Pin & Vee Block Test Machine | VIEW | ||
| ASTM D5620 | Drain and Dry Mode Using Falex Pin & Vee Block Test Machine | VIEW | ||
| ASTM D5621 | Sonic Shear, Hydraulic Fluids | VIEW | ||
| ASTM D5621 | Sonic Shear, Hydraulic Fluids | VIEW | ||
| ASTM D5706 | Extreme Pressure Properties Using SRV, Procedure A or B | VIEW | ||
| ASTM D5706 | Extreme Pressure, High-Frequency, Linear Oscillation, SRV | VIEW | ||
| ASTM D5706 | Extreme Pressure, High-Frequency, Linear Oscillation, SRV | VIEW | ||
| ASTM D5706 | Extreme Pressure Properties Using SRV, Procedure A or B | VIEW | ||
| ASTM D5706 | Extreme Pressure Properties of Lubricating Greases using SRV | NLGI – HPM+HL | VIEW | |
| ASTM D5707 | Friction and Wear Properties of Lubricating Greases using SRV | VIEW | ||
| ASTM D5707 | Friction and Wear Properties of Lubricating Greases using SRV | VIEW | ||
| ✓ | ASTM D5762 | Nitrogen | VIEW | |
| ✓ | ASTM D5762 | Nitrogen | VIEW | |
| ✓ | ASTM D5762 | Nitrogen | VIEW | |
| ✓ | ASTM D5762 | Nitrogen | GM dexos® | VIEW |
| ASTM D5769 | Benzene, Toluene, Total Aromatics by GC/MS | VIEW | ||
| ASTM D5769 | Benzene, Toluene, Total Aromatics by GC/MS | VIEW | ||
| ✓ | ASTM D5800 | Noack Volatility | VIEW | |
| ✓ | ASTM D5800 | Noack Volatility | VIEW | |
| ✓ | ASTM D5800 | Noack Volatility | VIEW | |
| ✓ | ASTM D5800 | Noack Volatility | VIEW | |
| ✓ | ASTM D5800 | Noack Volatility | API CK / FA-4 | VIEW |
| ✓ | ASTM D5800 | Noack Volatility | API SP | VIEW |
| ✓ | ASTM D5800 | Noack Volatility | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D5800 | Noack Volatility | SAE J183 | VIEW |
| ✓ | ASTM D5800 | Noack Volatility | GM dexos® | VIEW |
| ✓ | ASTM D5800 | Noack Volatility | ACEA | VIEW |
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | API CK / FA-4 | VIEW | |
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | ILSAC GF-6A/GF-6B | VIEW | |
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | SAE J183 | VIEW | |
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | API SP | VIEW | |
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | VIEW | ||
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | VIEW | ||
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | VIEW | ||
| ASTM D5800 Mod. | Noack Volatility, 150°C for 12 Hours | VIEW | ||
| ASTM D5827 | Sulfate Analysis (SO4) | VIEW | ||
| ASTM D5853 | Pour Point for Crude Oils | VIEW | ||
| ASTM D5969 | Corrosion-Preventive, Dilute Synthetic Sea Water Environments | VIEW | ||
| ASTM D5969 | Corrosion-Preventive, Dilute Synthetic Sea Water Environments | VIEW | ||
| ASTM D5969 | Corrosion-Preventive, Dilute Synthetic Sea Water Environments | NLGI – HPM+CR | VIEW | |
| ASTM D5972 | Freeze Point | VIEW | ||
| ASTM D6022 | Calculated Permanent Shear Stability Index | VIEW | ||
| ASTM D6022 | Calculated Permanent Shear Stability Index | VIEW | ||
| ASTM D6079 | Lubricity by HFRR | NA | ||
| ASTM D6079 | Lubricity by HFRR | NA | ||
| ✓ | ASTM D6082 | Foaming, Sequence IV (Specify Option A if Required) | VIEW | |
| ✓ | ASTM D6082 | Foaming, Sequence IV (Specify Option A if Required) | VIEW | |
| ✓ | ASTM D6082 | Foaming, Sequence IV (Specify Option A if Required) | VIEW | |
| ✓ | ASTM D6082 | Foaming, Sequence IV (Specify Option A if Required) | GM dexos® | VIEW |
| ✓ | ASTM D6082 | Foaming, Sequence IV (Specify Option A if Required) | API SP | VIEW |
| ✓ | ASTM D6082 | Foaming, Sequence IV (Specify Option A if Required) | ILSAC GF-6A/GF-6B | VIEW |
| ASTM D6130 | Elemental Analysis by ICP, Aqueous / Coolants / Sulfur, 5 elements | VIEW | ||
| ASTM D6130 | Elemental Analysis by ICP, Aqueous / Coolants / Sulfur, 5 elements | VIEW | ||
| ASTM D6138 | Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test – 2 Bearings) | VIEW | ||
| ASTM D6138 | Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) | VIEW | ||
| ASTM D6138 | Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test – 2 Bearings) | VIEW | ||
| ASTM D6138 | Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) | VIEW | ||
| ASTM D6138 | Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test – 2 Bearings) | VIEW | ||
| ASTM D6138 | Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) | VIEW | ||
| ASTM D6138 | Corrosion-Preventive Properties Under Dynamic Wet Conditions (Emcor Test) Distilled Water | NLGI – HPM Core | VIEW | |
| ASTM D6138 | Corrosion-Preventive Properties Under Dynamic Wet Conditions (Emcor Test) Distilled Water | NLGI – HPM+HL | VIEW | |
| ASTM D6138 | Corrosion-Preventive Properties Under Dynamic Wet Conditions (Emcor Test), 0.5 N NaCl Solution | NLGI – HPM+CR | VIEW | |
| ASTM D6138 | Corrosion-Preventive Properties Under Dynamic Wet Conditions (Emcor Test), 100% Seawater | NLGI – HPM+CR | VIEW | |
| ASTM D6138 | Corrosion-Preventive Properties, Dynamic Wet Conditions (Emcor Test) | NLGI – HPM+LT | VIEW | |
| ASTM D6138 | Corrosion-Preventive Properties, Under Dynamic Wet Conditions (Emcor Test) – Distilled Water | NLGI – HPM+WR | VIEW | |
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | VIEW | ||
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | VIEW | ||
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | VIEW | ||
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | NLGI – HPM Core | VIEW | |
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | NLGI – HPM+CR | VIEW | |
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | NLGI – HPM+HL | VIEW | |
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | NLGI – HPM+LT | VIEW | |
| ASTM D6184 | Oil Separation Percent, Wire Cone Method | NLGI – HPM+WR | VIEW | |
| ASTM D6185 | Compatibility of Two Greases | VIEW | ||
| ASTM D6185 | Compatibility of Two Greases | VIEW | ||
| ASTM D6186 | Oxidation Induction Time by PDSC | VIEW | ||
| ASTM D6186 | Oxidation Induction Time by PDSC | VIEW | ||
| ASTM D6200 | Cooling Curve Analysis of Quench Oils | VIEW | ||
| ASTM D6217 | Particulate Contamination for Diesel Fuels | VIEW | ||
| ASTM D6217 | Particulate Contamination for Diesel Fuels | VIEW | ||
| ASTM D6217 | Particulate Contamination for Diesel Fuels | VIEW | ||
| ✓ | ASTM D6278 | Kurt Orbahn Shear Stability, 30, 90 or 100 or Custom Passes | VIEW | |
| ✓ | ASTM D6278 | Kurt Orbahn Shear Stability, 30, 90 or 100 or Custom Passes | VIEW | |
| ✓ | ASTM D6278 | Kurt Orbahn Shear Stability, 30, 90 or 100 or Custom Passes | VIEW | |
| ✓ | ASTM D6278 | Kurt Orbahn Shear Stability, 30 Passes (GF6B Only) | API SP | VIEW |
| ✓ | ASTM D6278 | Kurt Orbahn Shear Stability, 30 Passes (GF6B Only) | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D6278 | Kurt Orbahn Shear Stability, 30 Passes (GF6B Only) | SAE J183 | VIEW |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6304 | Water by Karl Fischer | VIEW | |
| ✓ | ASTM D6335 | Thermo-oxidation Engine Oil Simulation Test (TEOST® 33C) | VIEW | |
| ✓ | ASTM D6335 | Thermo-oxidation Engine Oil Simulation Test (TEOST® 33C) | VIEW | |
| ✓ | ASTM D6335 | Thermo-oxidation Engine Oil Simulation Test (TEOST® 33C) (GF6A Only) | API SP | VIEW |
| ✓ | ASTM D6335 | Thermo-oxidation Engine Oil Simulation Test (TEOST® 33C) (GF6A Only) | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D6335 | Thermo-oxidation Engine Oil Simulation Test (TEOST® 33C) (GF6A Only) | SAE J183 | VIEW |
| ASTM D6371 | Cold Filter Plug Point | VIEW | ||
| ASTM D6371 | Cold Filter Plug Point | VIEW | ||
| ASTM D6371 | Cold Filter Plug Point | VIEW | ||
| ASTM D6375 | Noack Volatility by TGA | VIEW | ||
| ASTM D6375 | Noack Volatility by TGA | VIEW | ||
| ✓ | ASTM D6417 | Simulated Distillation by Gas Chromatography | VIEW | |
| ✓ | ASTM D6417 | Simulated Distillation by Gas Chromatography | VIEW | |
| ✓ | ASTM D6417 | Simulated Distillation by Gas Chromatography | VIEW | |
| ✓ | ASTM D6417 | Simulated Distillation by Gas Chromatography | VIEW | |
| ✓ | ASTM D6417 | Simulated Distillation by Gas Chromatography | VIEW | |
| ✓ | ASTM D6417 | Simulated Distillation by Gas Chromatography | VIEW | |
| ASTM D6425 | Friction and Wear Properties of Extreme Pressure (EP) Using SRV | VIEW | ||
| ASTM D6425 | Friction and Wear Properties of Extreme Pressure (EP) Using SRV | VIEW | ||
| ✓ | ASTM D6443 | Chlorine by XRF | VIEW | |
| ✓ | ASTM D6443 | Chlorine by XRF | VIEW | |
| ✓ | ASTM D6443 | Chlorine by XRF | VIEW | |
| ✓ | ASTM D6443 | Chlorine by XRF | VIEW | |
| ✓ | ASTM D6443 | Chlorine by XRF | GM dexos® | VIEW |
| ASTM D6482 | Cooling Curve Analysis of Aqueous Polymer Quenchants | NA | ||
| ASTM D6482 | Cooling Curve Analysis of Aqueous Polymer Quenchants | NA | ||
| ASTM D6557 | Ball Rust Test | VIEW | ||
| ASTM D6557 | Ball Rust Test | VIEW | ||
| ASTM D6557 | Ball Rust Test | API SP | VIEW | |
| ASTM D6557 | Ball Rust Test | ILSAC GF-6A/GF-6B | VIEW | |
| ASTM D6557 | Ball Rust Test | SAE J183 | VIEW | |
| ASTM D6557 | Ball Rust Test | GM dexos® | VIEW | |
| ASTM D6560 | Asphaltene Content | VIEW | ||
| ASTM D6560 | Asphaltene Content | VIEW | ||
| ✓ | ASTM D6594 | High Temperature Corrosion Bench Test at 135°C | VIEW | |
| ✓ | ASTM D6594 | High Temperature Corrosion Bench Test at 135°C | VIEW | |
| ✓ | ASTM D6594 | High Temperature Corrosion Bench Test at 135°C | API CK / FA-4 | VIEW |
| ✓ | ASTM D6616 | High Temperature High Shear / TBS Viscosity, 100°C, New & Used | VIEW | |
| ✓ | ASTM D6616 | High Temperature High Shear / TBS Viscosity, 100°C, New & Used | VIEW | |
| ✓ | ASTM D6616 | High Temperature High Shear / TBS Viscosity, 100°C, New & Used | VIEW | |
| ✓ | ASTM D6616 | High Temperature High Shear / TBS Viscosity, 100°C, New & Used | VIEW | |
| ASTM D6793 | Bulk Modulus, Up to 80°C | VIEW | ||
| ASTM D6793 | Bulk Modulus, Up to 80°C | VIEW | ||
| ASTM D6793 | Bulk Modulus, Up to 80°C | VIEW | ||
| ASTM D6793 | Bulk Modulus, Up to 80°C | VIEW | ||
| ASTM D6794 | Engine Oil Water Tolerance (EOWT) | VIEW | ||
| ASTM D6794 | Engine Oil Water Tolerance (EOWT) | VIEW | ||
| ASTM D6794 | Engine Oil Water Tolerance (EOWT) | API SP | VIEW | |
| ASTM D6794 | Engine Oil Water Tolerance (EOWT) | ILSAC GF-6A/GF-6B | VIEW | |
| ASTM D6794 | Engine Oil Water Tolerance (EOWT) | SAE J183 | VIEW | |
| ASTM D6795 | Engine Oil Filterability (EOFT) | VIEW | ||
| ASTM D6795 | Engine Oil Filterability (EOFT) | VIEW | ||
| ASTM D6795 | Engine Oil Filterability (EOFT) | VIEW | ||
| ASTM D6795 | Engine Oil Filterability (EOFT) | API SP | VIEW | |
| ASTM D6795 | Engine Oil Filterability (EOFT) | ILSAC GF-6A/GF-6B | VIEW | |
| ASTM D6795 | Engine Oil Filterability (EOFT) | SAE J183 | VIEW | |
| ASTM D6922 | Homogeneity & Miscibility | VIEW | ||
| ASTM D6922 | Homogeneity & Miscibility | VIEW | ||
| ASTM D6922 | Homogeneity & Miscibility | API SP | VIEW | |
| ASTM D6922 | Homogeneity & Miscibility | ILSAC GF-6A/GF-6B | VIEW | |
| ASTM D6922 | Homogeneity & Miscibility | SAE J183 | VIEW | |
| ✓ | ASTM D7097 | Thermo-oxidation Engine Oil Simulation Test (TEOST MHT®-4) | VIEW | |
| ✓ | ASTM D7097 | Thermo-oxidation Engine Oil Simulation Test (TEOST MHT®-4) | VIEW | |
| ASTM D7098 | Thin Film Oxygen Uptake Test (TFOUT) Catalyst B | VIEW | ||
| ASTM D7098 | Thin Film Oxygen Uptake Test (TFOUT) Catalyst B | VIEW | ||
| ✓ | ASTM D7109 | Kurt Orbahn Shear Stability – Includes 30 and 90 Passes | VIEW | |
| ✓ | ASTM D7109 | Kurt Orbahn Shear Stability – Includes 30 and 90 Passes | VIEW | |
| ✓ | ASTM D7109 | Kurt Orbahn Shear Stability – Includes 30 and 90 Passes | API CK / FA-4 | VIEW |
| ASTM D7213 | Boiling Range Distribution of Petroleum Distillates, 100°C to 615°C | VIEW | ||
| ASTM D7213 | Boiling Range Distribution of Petroleum Distillates, 100°C to 615°C | VIEW | ||
| ASTM D7213 | Boiling Range Distribution of Petroleum Distillates, 100°C to 615°C | VIEW | ||
| ASTM D7214 | FTIR Analysis, Oxidation by Peak Area Increase | VIEW | ||
| ASTM D7214 | FTIR Analysis, Oxidation by Peak Area Increase | VIEW | ||
| ASTM D7214 | FTIR Analysis, Oxidation by Peak Area Increase | VIEW | ||
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, HNBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, MAC, Vamac | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, NBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, HNBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, MAC, Vamac | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, NBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, MAC, Vamac | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, NBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, HNBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, FKM, Fluroelastomer | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, MAC, Vamac | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, NBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, ACM, Polyacrylate | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, FKM, Fluoroelastomer | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, MAC, Vamac | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, NBR, Nitrile | VIEW | |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, VMQ, Silicone | VIEW | |
| ✓ | ASTM D7216 | Elastomer Compatibility | VIEW | |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, ACM, Polyacrylate | API SP | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, FKM, Fluoroelastomer | API SP | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, HNBR, Nitrile | API SP | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate | API SP | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, VMQ, Silicone | API SP | VIEW |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, ACM, Polyacrylate | API CK / FA-4 | VIEW |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, FKM, Fluroelastomer | API CK / FA-4 | VIEW |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, MAC, Vamac | API CK / FA-4 | VIEW |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, NBR, Nitrile | API CK / FA-4 | VIEW |
| ✓ | ASTM D7216 | HDD Elastomer Compatibility, VMQ, Silicone | API CK / FA-4 | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, ACM, Polyacrylate | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, FKM, Fluoroelastomer | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, HNBR, Nitrile | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, VMQ, Silicone | ILSAC GF-6A/GF-6B | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, ACM, Polyacrylate | SAE J183 | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, FKM, Fluoroelastomer | SAE J183 | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, HNBR, Nitrile | SAE J183 | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate | SAE J183 | VIEW |
| ✓ | ASTM D7216 | GF-6 Elastomer Compatibility, VMQ, Silicone | SAE J183 | VIEW |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate | GM dexos® | VIEW |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer | GM dexos® | VIEW |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile | GM dexos® | VIEW |
| ✓ | ASTM D7216 | GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone | GM dexos® | VIEW |
| ASTM D7217 | Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation SRV | VIEW | ||
| ASTM D7217 | Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation SRV | VIEW | ||
| ASTM D7317 | Pentane Insolubles by Filtration | VIEW | ||
| ASTM D7317 | Pentane Insolubles by Filtration | VIEW | ||
| ASTM D7321 | Particulate Contamination for Biodiesel Fuels | VIEW | ||
| ASTM D7321 | Particulate Contamination for Biodiesel Fuels | VIEW | ||
| ASTM D7321 | Particulate Contamination for Biodiesel Fuels | VIEW | ||
| ✓ | ASTM D7412 | FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear | VIEW | |
| ✓ | ASTM D7412 | FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear | VIEW | |
| ✓ | ASTM D7412 | FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear | VIEW | |
| ASTM D7412 & D7415 | FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear | VIEW | ||
| ✓ | ASTM D7414 | FTIR Analysis, In-Service Fluid, Oxidation | VIEW | |
| ✓ | ASTM D7414 | FTIR Analysis, In-Service Fluid, Oxidation | VIEW | |
| ✓ | ASTM D7414 | FTIR Analysis, In-Service Fluid, Oxidation | VIEW | |
| ✓ | ASTM D7414 | FTIR Analysis, In-Service Fluid, Oxidation | VIEW | |
| ✓ | ASTM D7415 | FTIR Analysis, In-Service Fluid, Sulfate Content | VIEW | |
| ✓ | ASTM D7415 | FTIR Analysis, In-Service Fluid, Sulfate Content | VIEW | |
| ASTM D7420 | Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation SRV | VIEW | ||
| ASTM D7420 | Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation SRV | VIEW | ||
| ASTM D7421 | Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation SRV | VIEW | ||
| ASTM D7421 | Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation SRV | VIEW | ||
| ASTM D7462 | Oxidation Stability (Biodiesel – B100 Option) | VIEW | ||
| ASTM D7462 | Oxidation Stability (Biodiesel) | VIEW | ||
| ASTM D7462 | Oxidation Stability (Biodiesel) | VIEW | ||
| ASTM D7563 | Emulsion of Water and Simulated Ed85 Fuel | VIEW | ||
| ASTM D7563 | Emulsion of Water and Simulated Ed85 Fuel | VIEW | ||
| ASTM D7563 | Emulsion of Water and Simulated Ed85 Fuel | API SP | VIEW | |
| ASTM D7563 | Emulsion of Water and Simulated Ed85 Fuel | ILSAC GF-6A/GF-6B | VIEW | |
| ASTM D7563 | Emulsion of Water and Simulated Ed85 Fuel | SAE J183 | VIEW | |
| ASTM D7594 | Fretting Wear, High Hertzian Contact, High-Frequency, Linear-Oscillation, SRV | VIEW | ||
| ASTM D7594 | Fretting Wear, High Hertzian Contact, High-Frequency, Linear-Oscillation, SRV | VIEW | ||
| ASTM D7594 | Fretting Wear, High Hertzian Contact, High-Frequency, Linear-Oscillation, SRV | VIEW | ||
| ASTM D7594 | Fretting Wear, High Hertzian Contact, High-Frequency, Linear-Oscillation (SRV) | NLGI – HPM+HL | VIEW | |
| ASTM D7619/ ISO 4406 | Particle Count and Sizing | VIEW | ||
| ASTM D7619/ ISO 4406 | Particle Count and Sizing | VIEW | ||
| ✓ | ASTM D7624 | FTIR Analysis, In-Service Fluid, Nitration | VIEW | |
| ✓ | ASTM D7624 | FTIR Analysis, In-Service Fluid, Nitration | VIEW | |
| ✓ | ASTM D7624 | FTIR Analysis, In-Service Fluid, Nitration | VIEW | |
| ✓ | ASTM D7624 | FTIR Analysis, In-Service Fluid, Nitration | VIEW | |
| ✓ | ASTM D7844 | FTIR Analysis, In-Service Fluid, Soot | VIEW | |
| ✓ | ASTM D7844 | FTIR Analysis, In-Service Fluid, Soot | VIEW | |
| ✓ | ASTM D7844 | FTIR Analysis, In-Service Fluid, Soot | VIEW | |
| ASTM D8022 | Roll Stability in Presence of Water | VIEW | ||
| ASTM D8022 | Roll Stability in Presence of Water | VIEW | ||
| ASTM D8022 | Roll Stability in Presence of Water [using 1/2 scale penetration] | NLGI – HPM+WR | VIEW | |
| ✓ | ASTM D8447 | Thermo-oxidation Engine Oil Simulation Test (TEOST Turbo®) | NA | |
| ✓ | ASTM D8447 | Thermo-oxidation Engine Oil Simulation Test (TEOST Turbo®) | NA | |
| ASTM D8544 | Conductive Deposit Test (CDT), 1000 Hours, 150°C | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), 1000 Hours, 150°C (Includes ASTM D5185 ICP pre and post – reports Cu and S change) | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), 500 Hours, 150°C | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), 500 Hours, 150°C (Includes ASTM D5185 ICP pre and post – reports Cu and S change) | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), Other test durations and temperatures up to 180°C available upon request | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), 1000 Hours, 150°C | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), 1000 Hours, 150°C (Includes ASTM D5185 ICP pre and post – reports Cu and S change) | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), 500 Hours, 150°C | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), 500 Hours, 150°C (Includes ASTM D5185 ICP pre and post – reports Cu and S change) | VIEW | ||
| ASTM D8544 | Conductive Deposit Test (CDT), Other test durations and temperatures up to 180°C available upon request | VIEW | ||
| ASTM E1131 | TGA Soot | NA | ||
| ASTM E1131 | TGA Soot | NA | ||
| ASTM E1131 | TGA Soot | NA | ||
| ASTM E1269 | Specific Heat | VIEW | ||
| ASTM E1269 | Specific Heat | VIEW | ||
| ASTM E1269 & E1133 | Specific Heat and TGA for Fluids | VIEW | ||
| ASTM E1269 & E1133 | Specific Heat and TGA for Fluids | VIEW | ||
| ASTM E1269 & E1133 | Specific Heat and TGA for Fluids | VIEW | ||
| ASTM E1269 & E1133 | Specific Heat and TGA for Fluids | VIEW | ||
| ✓ | ASTM E1858 | Oxidation Induction Time by PDSC | VIEW | |
| ✓ | ASTM E1858 | Oxidation Induction Time by PDSC | VIEW | |
| ✓ | ASTM E1858 | Oxidation Induction Time by PDSC | VIEW | |
| ✓ | ASTM E1858 | Oxidation Induction Time by PDSC | VIEW | |
| ASTM E2250 | Thermal Stability by Thermogravimetry | VIEW | ||
| ASTM E2250 | Thermal Stability by Thermogravimetry | VIEW | ||
| ✓ | ASTM E2412 | FTIR Analysis, In-Service Fluid | VIEW | |
| ✓ | ASTM E2412 | FTIR Analysis, In-Service Fluid | VIEW | |
| ASTM E3070 | Shear Thinning Index of Non-Newtonian Liquids Using a Rotational Viscometer | VIEW | ||
| ASTM E3070 | Shear Thinning Index of Non-Newtonian Liquids Using a Rotational Viscometer | VIEW | ||
| CEC L-036-90 | High Temperature High Shear Viscosity, 150°C, New & Used Oil | NA | ||
| CEC L-036-90 | High Temperature High Shear Viscosity, 150°C, Used Oil | NA | ||
| CEC L-036-90 | High Temperature High Shear Viscosity, 150°C, Used Oil | NA | ||
| CEC L-036-90 | High Temperature High Shear Viscosity, 150°C, New & Used Oil | NA | ||
| CEC L-085-T99 | Oxidation Induction Time by PDSC | NA | ||
| CEC L-085-T99 | Oxidation Induction Time by PDSC | NA | ||
| CEC L-085-T99 | Oxidation Induction Time by PDSC | NA | ||
| CEC L-085-T99 | Oxidation Induction Time by PDSC | NA | ||
| ✓ | CEC L-105 | ACEA Low Temperature Pumpability | NA | |
| ✓ | CEC L-105 | ACEA Low Temperature Pumpability | NA | |
| ✓ | CEC L-109 | Bio-Diesel Oxidation Bench Test, in Duplicate 168 Hours | NA | |
| ✓ | CEC L-109 | Bio-Diesel Oxidation Bench Test, in Duplicate 216 Hours | NA | |
| ✓ | CEC L-109 | Bio-Diesel Oxidation Bench Test, Single Run 168 Hours | NA | |
| ✓ | CEC L-109 | Bio-Diesel Oxidation Bench Test, Single Run 216 Hours | NA | |
| ✓ | CEC L-109 | Bio-Diesel Oxidation Bench Test, Duplicate 168 or 216 Hours | NA | |
| ✓ | CEC L-109 | Bio-Diesel Oxidation Bench Test, Single Run 168 or 216 Hours | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE6 FKM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE7 ACM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE8 HNBR | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE9 AEM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE6 FKM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE7 ACM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE8 HNBR | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE9 AEM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE6 FKM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE7 ACM | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE8 HNBR | NA | |
| ✓ | CEC L-112 | Elastomer Compatibility, RE9 AEM | NA | |
| ✓ | CEC L-45-99 Mod. & D2270 | KRL Shear 4, 8, 20, 30 or 40 Hours + pre & post shear VI | NA | |
| ✓ | CEC L-45-99 Mod. & D2270 | KRL Shear Custom Hours + pre & post shear VI | NA | |
| ✓ | CEC L-45-99 Mod. & D2270 | KRL Shear 4, 8, 20, 30 or 40 Hours + pre & post shear VI | NA | |
| ✓ | CEC L-45-99 Mod. & D2270 | KRL Shear 4, 8, 20, 30 or 40 Hours + pre & post shear VI | NA | |
| ✓ | CEC L-45-99 Mod. & D2270 | KRL Shear 4, 8, 20, 30 or 40 Hours + pre & post shear VI | NA | |
| ✓ | CEC L-45-99 Mod. & D2270 | KRL Shear 4, 8, 20, 30 or 40 Hours + pre & post shear VI | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear 4, 8, 20, 30 & 40 Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear Custom Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear 4, 8, 20, 30 & 40 Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear Custom Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear 4, 8, 20, 30 & 40 Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear Custom Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear 4, 8, 20, 30 & 40 Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear Custom Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-45-99 Mod. & D445 | KRL Shear 4, 8, 20, 30 & 40 Hours + 1 Temperature pre & post shear KV | NA | |
| ✓ | CEC L-48 | Oxidation Stability of Lubricating Oils by Artificial Aging | NA | |
| ✓ | CEC L-48 | Oxidation Stability of Lubricating Oils by Artificial Aging | NA | |
| DIN 51805 | Flow Pressure, Kesternich Method | NA | ||
| DIN 51805 | Flow Pressure, Kesternich Method | NA | ||
| DIN 51805 | Flow Pressure, Kesternich Method | NA | ||
| DIN 51805 | Flow Pressure, Kesternich Method | NLGI – HPM+LT | NA | |
| DIN ISO 7148-1 | Tribological Test – Metallic Bearing Materials for Plain Bearings Under Conditions of Boundary Lubrication | NA | ||
| DIN ISO 7148-1 | Tribological Test – Metallic Bearing Materials for Plain Bearings Under Conditions of Boundary Lubrication | NA | ||
| DIN ISO 7148-2 | Tribological Test – Polymer-Based Plain Bearing Materials Under Specified Working Conditions | NA | ||
| DIN ISO 7148-2 | Tribological Test – Polymer-Based Plain Bearing Materials Under Specified Working Conditions | NA | ||
| EN 14078 | FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil | NA | ||
| EN 14078 | FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil | NA | ||
| EN 14112 | Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat | NA | ||
| EN 15751 | Oxidation Stability (Bio-based FAME Only) Rancimat | NA | ||
| EPA Test 24 | Volatile Organic Content (VOC) | NA | ||
| EPA Test 24 | Volatile Organic Content (VOC) | NA | ||
| EPA Test 24 | Volatile Organic Content (VOC) | NA | ||
| FTM 203C | Stable Pour Point | NA | ||
| FTM 203C | Stable Pour Point | NA | ||
| FTM 321 | Oil Separation, Wire Cone Method, Grease | NA | ||
| FTM 321 | Oil Separation, Wire Cone Method, Grease | NA | ||
| FTM 3005 | Dirt Count of Grease | NA | ||
| FTM 3005 | Dirt Count of Grease | NA | ||
| FTM 3456 | Channeling Characteristics | NA | ||
| FTM 3456 | Channeling Characteristics | NA | ||
| IP 346 | PCA – Polycyclic Analysis | NA | ||
| IP 346 | PCA – Polycyclic Analysis | NA | ||
| ISO 14635 | FZG Gear Test | NA | ||
| ISO 14635 | FZG Gear Test | NA | ||
| ISO 1817 | Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours | NA | ||
| ISO 1817 | Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours | NA | ||
| ISO 1817 | Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours | NA | ||
| ISO 1817 | Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours | GM dexos® | NA | |
| ISO 4406 | Particle Count | NA | ||
| ISO 4406 | Particle Count | NA | ||
| ISO 4406 | Particle Count | NA | ||
| ISO 4406 | Particle Count | NA | ||
| ISO 4406 | Particle Count | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, AU, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, FKM2, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, HNBR, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, NBR1, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, NBR2, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, AU, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, FKM2, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, HNBR, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, NBR1, 1000 Hours | NA | ||
| ISO 6072 | Elastomer Compatibility, Hydraulic Fluid, NBR2, 1000 Hours | NA | ||
| NACE TM0172 | Corrosive Properties of Cargoes in Petroleum Product Pipelines | NA | ||
| NACE TM0172 | Corrosive Properties of Cargoes in Petroleum Product Pipelines | NA | ||
| SAE J1703 & J1704 COR | Corrosion Test | NA | ||
| SAE J1703 & J1704 COR | Corrosion Test | NA | ||
| SAE J1703 & J1704 OR | Oxidation Resistance | NA | ||
| SAE J1703 & J1704 OR | Oxidation Resistance | NA | ||
| SAE J1703 & J1704 pH | pH Determination | NA | ||
| SAE J1703 & J1704 pH | pH Determination | NA | ||
| SAE J1703, J1704 & ISO 4925 | Compatibility | NA | ||
| SAE J1703, J1704 & ISO 4925 COM | Compatibility | NA | ||
| SAE J1703, J1704 & ISO 4925 CS | Chemical Stability | NA | ||
| SAE J1703, J1704 & ISO 4925 CS | Chemical Stability | NA | ||
| SAE J1703, J1704 & ISO 4925 ERBP | Equilibrium Reflux Boiling Point | NA | ||
| SAE J1703, J1704 & ISO 4925 ERBP | Equilibrium Reflux Boiling Point | NA | ||
| SAE J1703, J1704 & ISO 4925 ESBR | Effect on SBR Cups | NA | ||
| SAE J1703, J1704 & ISO 4925 ESBR | Effect on SBR Cups | NA | ||
| SAE J1703, J1704 & ISO 4925 HTS | High Temperature Stability | NA | ||
| SAE J1703, J1704 & ISO 4925 HTS | High Temperature Stability | NA | ||
| SAE J1703, J1704 & ISO 4925 LTF | Fluidity At Low Temperature | NA | ||
| SAE J1703, J1704 & ISO 4925 LTF | Fluidity at Low Temperature | NA | ||
| SAE J1703, J1704 & ISO 4925 WERBP | Wet Equilibrium Reflux Boiling Point | NA | ||
| SAE J1703, J1704 & ISO 4925 WERBP | Wet Equilibrium Reflux Boiling Point | NA | ||
| SAEJ1703 & J1704 & ISO 4925 WTT | Water Tolerance | NA | ||
| SAEJ1703 & J1704 & ISO 4925 WTT | Water Tolerance | NA | ||
| SAVLAB APP | Appearance | NA | ||
| SAVLAB APP | Appearance | NA | ||
| SAVLAB BDICP | Elemental Analysis for Biodiesel Fuels | NA | ||
| SAVLAB BDICP | Elemental Analysis for Biodiesel Fuels | NA | ||
| SAVLAB CAP | Cone and Plate Viscosity | NA | ||
| SAVLAB CAP | Cone and Plate Viscosity | NA | ||
| SAVLAB EV-WCT | Wire Corrosion Test (WCT), 130ºC, 72 Hours | NA | ||
| SAVLAB EV-WCT | Wire Corrosion Test (WCT), 130ºC, 72 Hours (Includes ASTM D5185 ICP pre and post – reports Cu and S change) | NA | ||
| SAVLAB EV-WCT | Wire Corrosion Test (WCT), Other test durations and temperatures up to 180ºC available upon request | NA | ||
| SAVLAB EV-WCT | Wire Corrosion Test (WCT), 130ºC, 72 Hours | NA | ||
| SAVLAB EV-WCT | Wire Corrosion Test (WCT), 130ºC, 72 Hours (Includes ASTM D5185 ICP pre and post – reports Cu and S change) | NA | ||
| SAVLAB EV-WCT | Wire Corrosion Test (WCT), Other test durations and temperatures up to 180ºC available upon request | NA | ||
| SAVLAB FEI | Fuel Efficiency Index (FEI) | NA | ||
| SAVLAB FEI | Fuel Efficiency Index (FEI) | NA | ||
| SAVLAB GES | GE Locomotive Specification (GE Package 1, B82-1 test) | NA | ||
| SAVLAB GES | GE Locomotive Specification (GE Package 1, B82-1 test) | NA | ||
| ✓ | SAVLAB IRG | Fourier Transform Infra-Red, FTIR, Glycol Analysis | NA | |
| ✓ | SAVLAB IRG | Fourier Transform Infra-Red, FTIR, Glycol Analysis | NA | |
| ✓ | SAVLAB IRW | Fourier Transform Infra-Red, FTIR, Water Analysis | NA | |
| ✓ | SAVLAB IRW | Fourier Transform Infra-Red, FTIR, Water Analysis | NA | |
| SAVLAB LINPUMP | Lincoln Vent Meter Pumpability, Below 0ºC | NA | ||
| SAVLAB LINPUMP | Lincoln Vent Meter Pumpability, Room Temperature | NA | ||
| SAVLAB LINPUMP | Lincoln Vent Meter Pumpability, Below 0ºC | NA | ||
| SAVLAB LINPUMP | Lincoln Vent Meter Pumpability, Room Temperature | NA | ||
| ✓ | SAVLAB LPYC | Density, Pycnometer | NA | |
| ✓ | SAVLAB LPYC | Density, Pycnometer | NA | |
| ✓ | SAVLAB LPYC | Density, Pycnometer | NA | |
| ✓ | SAVLAB LPYC | Density, Pycnometer | NA | |
| ✓ | SAVLAB LPYC | Density, Pycnometer | NA | |
| SAVLAB MIC | Microscopy | NA | ||
| SAVLAB MIC | Microscopy | NA | ||
| SAVLAB MIC | Microscopy | NA | ||
| SAVLAB PEI | Phosphorus Emissions Index (PEI) at 250ºC, 1, 16, 32, 48 or 64 Hour(s) | NA | ||
| SAVLAB PEI | Phosphorus Emissions Index (PEI) at 250ºC, 1, 16, 32, 48 or 64 Hour(s) | NA | ||
| SAVLAB pH-E70 | pH Determination | NA | ||
| SAVLAB pH-E70 | pH Determination | NA | ||
| SAVLAB RBP | Reflux Boiling Point | NA | ||
| SAVLAB RBP | Reflux Boiling Point | NA | ||
| SAVLAB SEI | Sulfur Emissions Index, (SEI) | NA | ||
| SAVLAB SEI | Sulfur Emissions Index, (SEI) | NA | ||
| SAVLAB SFACALC | Sulfated Ash, Calculated from ICP Results | NA | ||
| SAVLAB SFACALC | Sulfated Ash, Calculated from ICP Results | NA | ||
| ✓ | SAVLAB SPECTRA | Fourier Transform Infra-Red, FTIR, Spectra Only | NA | |
| ✓ | SAVLAB SPECTRA | Fourier Transform Infra-Red, FTIR, Spectra Only | NA | |
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, Multi Temperature Multi Shear | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, New & Used Oil | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, Other Shear | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, Used Oil | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, Used Oil | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, Multi Temperature Multi Shear | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, New & Used Oil | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, New & Used Oil | NA | ||
| SAVLAB TBR | High Temperature Low Shear / TBR Viscosity, Other Shear | NA | ||
| SAVLAB TBR-BFR | Bunker Fuel | NA | ||
| SAVLAB TBR-BFR | Bunker Fuel | NA | ||
| SAVLAB TGASCAN | TGA Thermal Scan or Isotherm | NA | ||
| SAVLAB TGASCAN | TGA Thermal Scan or Isotherm | NA | ||
| SAVLAB VLP | Viscosity Loss Profile (VLP), 20, 30 & 40+ Passes | NA | ||
| SAVLAB VLP | Viscosity Loss Profile (VLP), 20, 30 & 40+ Passes | NA | ||
| SAVLAB VLP | Viscosity Loss Profile (VLP), 20, 30 & 40+ Passes | NA | ||
| SAVLAB VLP | Viscosity Loss Profile (VLP), 20, 30 & 40+ Passes | NA | ||
| SAVLAB WHAT | Fuel Additive Water Uptake | NA | ||
| SAVLAB WHAT | Fuel Additive Water Uptake | NA | ||
| US Steel LT- 37 | Grease Mobility | NLGI – HPM+LT | NA | |
| US Steel LT-37 | Grease Mobility | NA | ||
| US Steel LT-37 | Grease Mobility | NA |
Applications
Quick Contact
Contact Us
- +1 (989) 496-2301
- savant@savantgroup.com
- 4800 James Savage Rd, Midland, MI 48642
- Monday - Friday: 8AM - 5PM
