High-Performance Multiuse Grease Specification + High Load
High-load greases provide resistance to very strong pressures, impacts, and limiting conditions for lubrication. Savant Labs are positioned to address your grease testing needs. Below are the performance tests noted in the specification for HPM + High Loadreferred to as HPM+HL.
| International ASTM Method | |
|---|---|
| D217 | Cone Penetration, Worked & 60 Strokes |
| D217 | Cone Penetration, Extended Worked (100,000 Strokes) |
| D4289 | Grease Compatibility with NBR L Elastomer |
| D942 | Oxidation Stability (Grease) |
| D1264 | Water Washout Characteristics of Greases |
| D1478 | Low Temperature Torque |
| D1742 | Oil Separation, Storage of Grease |
| D6184 | Oil Separation Percent, Wire Cone Conical Sieve Method |
| D1831 | Roll Stability of Grease |
| D2266** | Four Ball Wear |
| D2596** | Extreme-Pressure Properties of Lubricating Grease |
| D1743 | Rust & Corrosion Prevention Properties of Grease |
| D6138 | Corrosion-Preventive Properties Under Dynamic Wet Conditions (Emcor Test) Distilled Water |
| D4048 | Detection of Copper Corrosion |
| D5706** | Extreme Pressure Properties of Lubricating Greases using SRV |
| D4170** | Fretting Wear, Grease |
| D7594** | Fretting Wear, High Hertzian Contact, High-Frequency, Linear-Oscillation (SRV) |
| **Testing Specific to HPM+HL |
The High-Performance Multiuse Grease Specification testing for the other sub-categories are listed below:
High-Performance Multiuse grease specification + Corrosion Resistance
High-Performance Multiuse grease specification + Low Temperature
High-Performance Multiuse grease specification + Water Resistance