API SN, ILSAC GF-5/GF-5 Plus & SAE J183
Savant Labs has the ability and capacity to perform the testing required for the fresh oil viscosity and bench test requirements, including the elastomer compatibility testing necessary to meet the standards below.
ISLAC GF-5 specifications provide for improved high temperature deposit protection, sludge control, improved fuel economy, enhanced emission control system compatibility, seal compatibility, and protection of engines operating on ethanol-containing fuels up to E85.
The SAE (Society of Automotive Engineers) has adopted these improvements in the SAE J183 standard.
| ASTM International Method | |
|---|---|
| ASTM D445 | Kinematic Viscosity |
| ASTM D892 & D6082 | Foaming, Sequence I - IV |
| ASTM D2622 | Sulfur by XRF - Wavelength Dispersive |
| ASTM D4683 | High Temperature High Shear /TBS Viscosity |
| ASTM D4684 | TP-1 MRV Viscosity, Single Temperature |
| ASTM D4951 | Elemental Analysis by ICP, Wear Metals |
| ASTM D5133 | Gelation Index |
| ASTM D5293 | Cold Cranking Simulator |
| ASTM D5800 | Noack Volatility |
| ASTM D6335 | TEOST 33C |
| ASTM D6557 | Ball Rust Test |
| ASTM D6794 | Engine Oil Water Tolerance (EOWT) |
| ASTM D6795 | Engine Oil Filterability (EOFT) |
| ASTM D6922 | Homogeneity & Miscibility |
| ASTM D7097 | TEOST MHT-4 |
| ASTM D7216 | GF-5 Elastomer Compatibility, ACM |
| ASTM D7216 | GF-5 Elastomer Compatibility, FKM |
| ASTM D7216 | GF-5 Elastomer Compatibility, HNBR |
| ASTM D7216 | GF-5 Elastomer Compatibility, MAC |
| ASTM D7216 | GF-5 Elastomer Compatibility, VMQ |
| ASTM D7563 | Emulsion of Water and Simulated Ed85 Fuel |
